DIANA MODEL 27 TRIGGER ADJUSTMENT  

Posted by: @hueorgib

Thanks to everyone who has helped.I understand that the front screw in front of the trigger is the lock screw.And everyone has said that to adjust the trigger you turn the back adjustment screw clockwise until it stops and then turn the screw counterclockwise 2 turns and adjust from there.MY question is where is the lock position on the lock screw all the way in clockwise or all the way out counterclockwise? thanks in advance for any help.

I'm not familiar with the Diana 27 trigger but lock screws normally work by screwing in (ie clockwise) don't they?

https://www.pyramydair.com/blog/2017/09/the-diana-27-part-2/

this might be the right trigger down the page a bit